Digi Sport Performance - 214-257-8221 - 2401 Worthington Drive, Suite 133 Denton, TX 76207

You are here

Adjusting Linkage

Adjusting Linkage


Dieselgeek Short Shifter

In neutral the shifter linkage will move up and down, there is a black plastic L on the transmission, this can be moved "in" near the first/second gear gate. This should be pushed in and holding the linkage in this position.
You will now use the 16d nail that came with the dieselgeek.com linkage. Place this into the two holes inside the shifter boot.
Tighten the 7/16" nuts and use the supplied allen wrench as a counterhold.
release the L
remove the 16d nail
test 1-5 and push down, left, and up for reverse.

Dieselgeek TTX Short Shifter

Refer to Bentley Manual at this time.